Stop every jail cleanly when the host shuts down
jailops stop-all and the jailops_shutdown service stop the jails in the order of their dependencies before the host shuts down, so a database flushes. Boot order, the grace each jail gets and the settings in rc.conf.
Why order matters
A web jail needs its database, and the database needs time.
When a host shuts down, a database should flush its files before the disk goes away, and a web application should stop before the database it talks to. JailOps does both: the jails stop one after the other, the ones that depend on others first, and start again in the opposite order.
Starting in order
Autostart, priority and dependencies.
A jail starts when the host boots only if it has autostart. The order comes from boot.depends (a jail starts after the jails it names) and boot.priority (among jails that are ready, the lower number starts first).
$ jailops create db --image freebsd-15-1 --network lan --storage default --autostart --start $ jailops create web --image freebsd-15-1 --network lan --storage default --autostart --depends db --start $ jailops boot
jailops boot prints the plan: the jails in the order they start, with the reason, and the jails with autostart that it will not start, with why. It changes nothing.
Stopping in order
The reverse, automatically.
The package installs the service jailops_shutdown. At shutdown it runs jailops stop-all: every running jail of every project, a jail before the jails it depends on, so the web jail stops before its database. A jail that cannot be stopped is reported and the others are stopped anyway.
$ jailops stop-all --dry-run # the order, nothing stopped $ jailops stop-all --grace 60s # how long each jail gets
A jail has ten seconds to shut down by itself before it is killed. A database that needs longer sets its own time, with --stop-timeout 60 when the jail is made or jailops config set db boot.stop_timeout 60 later; it takes effect at the next start. Raise jailops_shutdown_timeout as well, so the host waits for the jails together.
Restarting the daemon never stops a jail.
The settings
Three lines in rc.conf.
jailops_shutdown_enable: on wheneverjailopsd_enableisYES.NOleaves the jails to the system.jailops_shutdown_timeout: the seconds for all the jails together, 80 by default. It has to stay belowrcshutdown_timeout(90 by default), so raise both for a host with slow databases.jailops_shutdown_grace: the time each jail gets to shut down, for example30s.
More articles
Jail updates without cron
Replace the nightly script that upgrades every jail: automatic jail upgrades per image, with a health check, a rollback and a record of every run, what they leave alone, and how a new FreeBSD release comes in.
Read the article: Jail updates without cronJail search and shell
Ctrl+K, a few letters, Shift+Enter: find a jail by name, label or app and open its shell. Labels that filter the jail list, bash in new jails, and the jailops command next to every step.
Read the article: Jail search and shellGetting started with the JailOps CLI
Root on the host, the command line and nothing else: install JailOps, build an image, create a network and a jail, reach it by name, snapshot it, open a port and install an app.
Read the article: Getting started with the JailOps CLIJailOps on a netcup server, with IPv6 that stays up
A /64, a router pair and a FreeBSD default that drops their probes. How every jail gets its own IPv6 address on netcup, and the one sysctl that ends the random unreachable alerts.
Read the article: JailOps on a netcup server, with IPv6 that stays upOne small cloud server, many services, solid IPv6
Run your database, web tier and workers on one low-cost server, each jail with its own IPv6 address, and fix the alerts a shared /64 causes with one sysctl.
Read the article: One small cloud server, many services, solid IPv6Write your own app: memcached, from package to catalog
Turn a small FreeBSD package into a JailOps app: the definition line by line, the offline check, a local install, the five traps, and the pull request that puts it in the catalog.
Read the article: Write your own app: memcached, from package to catalogFrom catalog to running service in one command
Install nginx from the app catalog with one command, see each of its steps, and find the data, the configuration, the logs and the snapshot afterwards.
Read the article: From catalog to running service in one commandA firewall you can read
Policies, address sets and jails by name (jail:web), each with a comment, so the firewall can be reviewed by someone who did not write it.
Read the article: A firewall you can readPostgreSQL and git, closed except for who needs them
Close a database and a git server, then let in exactly the web jail and the office, with a comment on every entry.
Read the article: PostgreSQL and git, closed except for who needs themProjects are boundaries
A project is a boundary. Another project is an external host, so only addresses cross it, written out on both sides. Why that is simpler to review, and what a project does not isolate.
Read the article: Projects are boundariesThe life of a jail
A jail starts at boot only when you declared it with --autostart. Why JailOps does it this way, how the order is decided, and how to see it with jailops boot.
Read the article: The life of a jailTab completion for jailops
Press Tab and get the names of your jails, networks and firewall policies, even on another host. How to install and turn on completion in bash, zsh and fish.
Read the article: Tab completion for jailopsTest the firewall before you trust it
Ask the firewall whether a connection would pass, and why, before you try it. Read the answer, put it in a script, and know what it cannot tell you.
Read the article: Test the firewall before you trust itSee a connection before it happens
Pick a From and a To, a protocol and a port, press Run, and see the connection flow through the firewall: what passes, what stops it, and which rule decides.
Read the article: See a connection before it happensLimit what a jail can use
Give a jail a ceiling for memory, processes, CPU, disk, firewall states and bandwidth, one command each, and know what happens when it reaches it.
Read the article: Limit what a jail can useOne line in pf.conf
The host's firewall stays yours. JailOps asks for one line, and everything for the jails lives below it.
Read the article: One line in pf.confWhat the host tells you by itself
A pool that reports an error, an uplink that goes down, a jail that reaches a limit: they show up in the event stream by themselves.
Read the article: What the host tells you by itselfNetworks the host controls
No bridge, no DHCP. The host hands out the addresses, gives each jail a link of its own and is the router, so jails cannot see or impersonate each other.
Read the article: Networks the host controlsVolumes: data that outlives a jail
Keep the data in a volume and the jail disposable. One volume can be attached to several jails, has its own snapshots and its own backup.
Read the article: Volumes: data that outlives a jailBack up volumes once
One copy of a volume, however many jails use it. Leave volumes out when you want to, bring them back with the jail.
Read the article: Back up volumes onceA private Docker registry
A registry of your own with users in a file: one jail, docker-registry and docker-auth, htpasswd for the passwords, the images on a volume.
Read the article: A private Docker registryNames for jails
A jail is reached by its name inside its project: db.shop.internal, or just db. Create a jail and its name is there; delete it and the name is gone.
Read the article: Names for jails
Try it on one server.
Try the console from the screenshots, install on a clean FreeBSD 15.1 machine, or add JailOps to a host you already run.